fall, The outside temperatures, and in not a few houses and apartments of the mold will now be fungus. But that must not be. By proper Heating and Ventilation, as well as other handles the attack can be prevented.
in The winter time in many indoor mould infestation areas. This usually has nothing to do with unsanitary conditions. “What brings the mold to Sprout is a blend of decreasing outdoor temperature, cold wall surfaces, and elevated humidity in the rooms,” says Simon Gebhardt , whose ISOTEC-Fachbetrieb to the elimination of moisture damage to buildings and mold infestation specialized.
in the absence of the residents should be the room temperature, ideally 16 to 18 °C. Because from about 13 degrees of the wall surface temperature of the air in the room can cool down in such a way that the moisture contained to a thin film of water condenses on the wall surface and thus to the optimal breeding ground for mold infestation. the However, even if the room air is kept constant at 18 °C, this is not a guarantee against the mold. Often a means of constructional lead to vulnerabilities, such as building corners or projecting balcony parts, the wall surface temperature drops still below 13 °C and thus risk of mould fungus. Moreover, it is not possible to have humidity in the living room in the first place. It inevitably comes through the air we breathe (50 grams per Person / per hour), cooking (1,000 to 3,000 grams per day) and bathing and showering (1,000 grams per Person per day). Against weak points in the structural design of a interior can help insulation, for example, the ISOTEC climate plate, which protects against Condensation and mould damage as a preventive measure. “And the ventilation behavior of the residents plays a crucial role, especially in the Winter,” emphasizes Gebhardt .
About a third of the inhabitants of airing false
The Ventilation of the spaces, the gap ventilation through tilted Windows is the worst variant. According to a recent representative survey of tsn Emnid airing than 30% of your home only on the Windows tilted and wrong. In the case of low outside air temperature of the room cools, the gap ventilation, in particular, the Wall portions adjacent to the window is tilted. Large quantities of moisture are added by showering or cooking, there is an increased risk of mould fungus. the Better the so-called is suitable for cross ventilation – also threading. For two to five minutes (depending on outside temperature), open all the Windows and doors of the apartment level. The room air exchange is in the same period, more than 30 Times higher than in the case of night ventilation; and the energy requirement for Reheating the air in the room is reduced.
+ This type of mold usually occurs in the case of night ventilation in the Winter.©Isotec
More tips of the ISOTEC-experts: furniture, especially in new buildings, should be about 30 centimeters away from the wall, placed in order for the still existing moisture to dry and the ambient air can adequately circulate. you should Also dry the Laundry not in the living areas. Dripping wet Laundry can deliver up to 500 grams of moisture per hour, thrown the Laundry up to 200 grams per hour.
mold fungal infection, always by a specialist remove
occurred mould once, it is recommended by many as a first measure the Wipe with Anti-mold agents from the hardware store. the But be careful! , The mold can not put in the Wipe off harmful spores that are visible to the naked eye is visible and in the whole living room distribute. A mold damage infestation should be removed therefore from the professional. According to the German Federal environment Agency this is mandatory, if the infestation has reached an area of half a square meter, and more.
for More information on www.isotec-gebhardt.de
contact
Gebhardt+Gebhardt GmbH
Ernst-Heinkel-Ring 19
d-85662 hohenbrunn
Tel: 08102 – 998200
Web: www.isotec-gebhardt.de
